Product Description
Cable Type: The RJ45 cable tester is built-in high performance chip, which provide faster test results when checking wires and data points,testing both of the RJ11 telephone cable and RJ45 network Ethernet LAN cables such as RJ45 Cat6 Cat6a Cat5 Cat5e Cat7.
The RJ45 cable tester features a nice LED display which indicates. And the results that are easy for anyone to understand. It can be used by both professionals and unskilled home-users.
The network cable tester provides the verification detail of wires to ensure that your homemade networking Ethernet cable is flowing optimally by thoroughly testing the cables to discover any wiring. And it will inform you whether the cables are paired and connected correctly or not.
Notice£ºThe RJ45 cable tester function by 9V battery or USB Cable. The battery is not included in the package.
Package: Cable tester × 1, Type-c power cable × 1£¬bag × 1£¬ 9V Battery Not included!
What is the difference between "rechargeable" and "normal"?
Rechargeable model: It supports power storage, you can fully charge the battery before using it, or you can use a 9V battery
Normal model£º It can only be powered by USB cable or 9V battery
How to use:
- You need to buy a 9v battery and install it on the tester, or powered by usb cable
- Put cables into both main tester and remote tester.
- Turn on the master unit by sliding over the switch to either
ON = Normal test mode
S = Slow automatic mode
OFF = Tester off
- The tester now checks each of the 8 wires one after the other.
If wired correctly the sequence on both the master and remote unit will be light£º
1-2-3-4-5-6-7-8
Following are abnormal connections:
1. If one cable, for example cable NO.3 is open circuited, the two NO.3 lights of the main tester and remote tester will not light on.
2. If several cables are not connected (3 or more), none of the lights is on.
3. If two ends of a cable is disordered, for example NO. 2 and NO. 4, then displays on: Main tester: 1-2-3-4-5-6-7-8 / remote tester: 1-4-3-2-5-6-7-8