Thermalright AMD-ASF CPU Fixing Buckle with Wrench AM5 CPU Bending Corrector Frame Protector Replacement for AMD RYZEN 7000
Feature:
1. Comparison: Compared with other similar products, this product uses four side flat pressure instead of multi-point pressure, with accurate positioning, avoiding capacitance, which is conducive to CPU fixation;
2. Insulation protection pad: The contact surface with the main board is flat bottom, and the original LOTES insulation protection pad of the same specification is used to reduce the pressure on the main board and further reduce the signal interference;
3. Signal interference: The metal surface is raised to reduce the signal interference on the motherboard side;
4. Materoal: This CPU orthotic device has two colors: black and red. It is made of anodized sand blasting all aluminum alloy CNC precision machining, uses the original insulation rubber pad, and is fixed with hexagonal socket screws. It is easy to install and can reduce the penetration of silicone grease at the edge of the CPU;
5. Description: Due to the design of the AMD Ryzen 7000 "special-shaped" CPU top cover, when installing the radiator, due to the installation pressure, there will be excess thermal conductive silicone grease extruded, which will accumulate at the gap of the AMD Ryzen 7000 CPU, which may be difficult to remove, or even leak into the capacitor, which may pose a safety hazard.
Specification:
Origin: Mainland China
Model Number: CPU Bracket
Type: CPU Holder
Color: Black, red (optional)
Properties: No silicone grease, with silicone grease (optional)
Material: Aluminum alloy
Process: CNC anode sanding
Fixing accessories: L-type screwdriver
Size: 70x54x6mm/2.76x2.13x0.24in
Weight: Body 20g, overall 55g
Installation process:
1. Place the motherboard horizontally on the desktop and open the CPU clip
2. Use the attached T20 Torx screwdriver to remove the upper part and put the lower fastener aside
3. Put the CPU in
4. Cover the improved snap on the CPU top cover and gently move it until it clicks into place
5. Tighten the screws on the opposite angle by half a turn. Each screw takes half a turn in diagonal order until it is screwed on, will put pressure on the CPU unevenly
Note:
Only processors with new AM5 interfaces are compatible, such as the new Ryzen 7000 series.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.