Speed bandwidth: USB 2.0 standard 0.48G/bps high speed
Current capacity: 3A (measured within 10cm supports 3A, within 1 meter supports 1.5A)
Product application: devices such as single-chip development boards are connected to industrial cameras, hard disk boxes, etc. through micro-B for data transmission or charging purposes
Purchase restrictions: This product is designed to be connected to built-in USB devices. It is not suitable for ordinary external use. It is limited to the designated purchase by the product engineer, and individual buyers are not allowed to place an order. The structure of this product is fragile and fragile, not suitable for civilian use, and it is not easy to use for general purposes. Please consider it carefully before placing an order.
Procurement Tip: Be sure to buy 1~2 samples to test and verify that they are correct before purchasing in bulk.
USB-A to micro-B Extension Cable, USW2 Series Products
Product Name
Model
Bandwidth
Straight A male to straight B female
US1C-UW4
USB2.0
Upward A male to straight B female
US2C-UW4
USB2.0
Straight A male to downward B female
US1C-UW3R
USB2.0
Upward A male to downward B female
US2C-UW3R
USB2.0
Wire length description:
The length of the wire in our shop refers to the part of the visible wire, excluding the PCB and the connector`s Lengths. If the PCB and the connector are included, add about 4cm. Refer to the figure below for the line length dimension.
Product advantages:
1. Wire advantages, use ADT`s self-designed wire, the wire is thin, thin and flat, and the core wire is shielded with aluminum foil for anti-interference
2. Line length advantage, from 3 cm to 10 meters can be customized
3. Multi-core wire design, support high current stability
4. The PCB adopts high-frequency and low-resistance high-quality materials, the PCB workmanship is precise, the PCB uses high TG sheet, the thickness of the copper material is thickened to 1oz, the PCB power circuit is strengthened, and the multi-core wire design is strengthened to use 2 VBUS and 4 grounds. In this way, there are 6 power cores, the transmission current is stronger, and the high current 5V/6A is supported.
Summary of technical issues
How thick is the wire? Is it soft?
The thickness of the wire of this product is only 1.3mm, so the wire of this product is softer. The wire can be bent or folded without affecting the use.
How is the quality of the wire? Is there a shield?
There are aluminum foil shielding, using EMI shielding conductive polymer, new material for EMI shielding, flat cable design. This technique allows each cable to be completely covered by an EMI shield of conductive polymers to prevent incoming or outgoing emissions of electromagnetic frequencies, minimising interference and performance degradation, and reducing wire weight.