Speed bandwidth: USB 3.0 standard 5G/bps full speed
Current capacity: 1.5A within 50cm, 0.9A within 1 meter
Product application: GPS navigator, hard disk box, imaging equipment, ROCK Pi 4 Raspberry Pi microcontroller development board, built-in USB device extension transfer, convenient for brushless gimbal, USB power supply and transmission of handheld gimbal, etc.
Purchase restrictions: This product is designed to be connected to built-in USB devices. It is not suitable for ordinary external use. It is limited to the designated purchase by the product engineer, and individual buyers are not allowed to place an order. Only for OTG external use Not suitable for civilian use, general use is not easy to use, does not support returns and exchanges, please consider carefully before placing an order
Procurement Tip: Be sure to buy 1~2 samples to test and verify that they are correct before purchasing in bulk.
Wire length description:
The wire length of our shop refers to the visible wire part, excluding PCB and connectors, please refer to the blue arrow line length 5cm in the following figure.
Models description:
Name
Model
Bandwidth
Straight C female (slave) to straight B male(main)
With IC/E-mark
UT4A-UW6B
Positive plug 3.0
Reverse plug 3.0
Straight C female (slave) to straight B male(main)
Without IC/E-mark
UT4B-UW6B
Positive plug 3.0 Reverse plug 2.0
Angled C female (slave) to straight B male(main)
With IC/E-mark
UT5A-UW6B
Positive plug 3.0
Reverse plug 3.0
Angled C female (slave) to straight B male(main)
Without IC/E-mark
UT5B-UW6B
Positive plug 3.0 Reverse plug 2.0
Angled C female (slave) with slot hole
to straight B male(main) With IC/E-mark
UT5T-UW6B
Positive plug 3.0
Reverse plug 3.0
Angled C female (slave) with slot hole
to straight B male(main) With IC/E-mark+baffle
UT5T-UW6B+BK
Positive plug 3.0
Reverse plug 3.0
Note: (Master) means connecting to the host port; (Slave) means connecting to devices such as hard drives, cameras, etc.
Remarks: Only for OTG external use
Common USB extension cables are available in our store, and the models are as follows:
Summary of technical issues:
How thick is the wire? Is it soft?
The thickness of the wire of this product is only 1.4mm, so the wire of this product is softer.
How is the quality of the wire? Is there a shield?
Using EMI shielding conductive polymer, new material for EMI shielding, flat cable design. This technique allows each cable to be completely covered by a conductive polymer EMI shield to prevent incoming or outgoing emissions of electromagnetic frequencies, minimize interference and performance degradation, and reduce the weight of the spreader.
Technical data download:
3DDimensions:
Schematic:
Friendly reminder: Please use Adobe Acrobat Reader DC original software for 3D size PDF files