When
the vehicle is driving in tight places, you cannot observe small obstacles around the vehicle. In fact, it is very dangerous.
In order to solve the above problems, we can install a high-definition camera on the side of the car. At this time, the surrounding obstacles are visible and safe!
This camera, according to the image , is divided into two types:
1: Car rear camera. It is usually installed on the side of the car or on the rear bumper of the car to see the rear wheel position of the car or obstacles behind the car.
2: Car front camera. Generally installed on the side of the car, check the obstacles around the front wheels of the car.
In order to achieve different functions, the power supply method of the camera will also be different, please supply power according to your needs.
Power supply mode 1: ACC+, start the car, start the camera
Power supply mode 2: The steering device takes power, when you swing the steering switch, the camera is activated.
Power supply mode 3: reversing light + take power, start the camera when reversing.
Specification:
Condition: 100% Brand New
Materials: plastics, electronic components,Colour: Black
Image sensor: 1/3 color CMOS
System: NTSC or PAL, Default: NTSC
Pixel: 628*582/510*492
TV Line: 420/380
Angle: 140
Working voltage: DC12V
Horizontal resolution: 420 TV lines
Video output: 1.0 VP-P, 75 OHM Gamma factor: 0.45
White Balance: Auto, Scanning System: 2:1 Interlace
Waterproof grade: IP67/68
Minimum illumination: 0.1 Lux/F=1.2 (0 Lux, IR on)
Working temperature: -20¡É-75¡É, the maximum relative humidity is 95%
Storage temperature: -40¡É-85¡É, maximum relative humidity 95%
packing list:
1 * Rear View Camera
1 * Power Cord
1 * Video Cable