![](https://ae01.alicdn.com/kf/S39a9f5dc93ef4a7c93cae20fe87fcf0bx.jpg?width=800&height=801&hash=1601)
Special reminder:
Adding ink has a certain success rate, and not all ink cartridges will be printed. This is related to the situation of the ink cartridges themselves and the experience of adding ink. If they cannot be printed or work, they are not within the after-sales scope.
The five ink injection holes of the black ink cartridge are all connected, the red ink cartridge has one hole, and the yellow ink cartridge and the blue ink cartridge have two holes (experience ink cartridges are all one hole).
Ink adding method for black ink box
1. Put paper towels or other materials with good hygroscopicity on the countertop to prepare for absorbing the spilled ink.
2. Gently peel off the label paper on the ink cartridge (do not tear it, but stick it back) to expose the ink injection hole.
3. The five holes arranged under the label are air guide holes and ink injection holes, which can generally be filled with ink. However, for safety reasons, please identify the hole with black ink facing the light as the ink injection hole.
4. Take out the telescopic bottle filled with black ink, remove the sealing cap, and exhaust the air in the bottle as far as possible with the needle facing upwards. Then insert the needle into the ink injection hole and fill it as deep as possible. The ink injection amount should be controlled at about 1/3 of the ink capacity of the ink cartridge (4-5ML is enough).
5. Place the ink cartridge (the ink injection hole is upward) above the table by hand, and shake the ink cartridge from top to bottom for two or three times. So as to fill the ink cartridge with ink.
6. Wipe the nozzle of the ink cartridge with a paper towel and stick the label paper back. Put the ink cartridge back into the printer for "print head cleaning" for 2 to 3 times, and then carry out test printing or nozzle test.
Ink adding method of color ink box
1. Remove the label from the upper part of the ink cartridge and see that there are five small holes under the label;
2, distinguish colors, one hole is red, two holes are blue, and two holes are yellow (toothpicks can be inserted into the holes to distinguish colors);
3. Put paper towels or other materials with good hygroscopicity on the countertop to prepare for absorbing the spilled ink.
4. Gently peel off the label paper on the ink cartridge (don`t tear it up, it still needs to be pasted back) to expose the ink injection hole.
5. The five small holes arranged under the label are air guide holes and ink injection holes, so correctly distinguish the positions of the three colors to be injected with ink against the light (toothpick can be used if it is difficult to distinguish).
6. Take out the telescopic bottle filled with blue (red or yellow) ink, remove the sealing cap, and try to exhaust the air from the bottle with the needle facing upwards. Then insert the needle into the ink injection hole of the corresponding color and fill it as deep as possible. The ink injection amount should be controlled at about 1/3 of the ink capacity of the ink cartridge (2ML for each color is enough).
7. Place the ink cartridge (the ink injection hole is upward) above the table by hand, and shake the ink cartridge from top to bottom for two or three times. So as to fill the ink cartridge with ink.
Special note:
1, the ink cartridge should not be filled too much, the black color should not exceed 10ML, and each color should not exceed 4ML. (Experience that the ink cartridge is halved.) If you can`t master the weight, you can buy an ink injection tool from the pharmacy, which has scales on it. Try not to get ink on the circuit part during ink injection.
2. After ink injection, stamp the folded tissue paper with a nozzle. If the black ink cartridge prints a small black rectangular square and the colored ones are three thick lines of Huang Honglan, it is normal.
3. If there is a broken line or lack of color in the middle, swing the nozzle down hard until the ink can be printed by the above method!
4. If the method of 3 still doesn`t work, let the nozzle stand down for a period of time. If it doesn`t work domestically, you can buy an ink pumping tool and try it.