|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- Æ÷Àå: ±×·¸½À´Ï´Ù
- Ä¡¼ö(WxHxD): 70*60*19mm
- Áß·®: 0.2
- ¸ðµ¨ ¹øÈ£: ZC-24Vauidorelay-220302
- ȣȯ ¿Àµð¿À ¹× ºñµð¿À Àåºñ ½ºÅ¸ÀÏ: Àü¹® ¿Àµð¿À Àåºñ
- ¿ø»êÁö: Áß±¹
¿É¼ÇÁ¤º¸[(193)10A][(29)30A]This audio signal delay module is a stable version of 8-24V wide voltage power supply. The module detects that the relay is connected with an audio signal, and there is no audio signal, and the delay is disconnected. During the delay time, it continuously receives an audio trigger signal, the relay is always connected, the relay will not be disconnected or flashed, and the audio trigger signal stops. After that, the timing starts from a new one, and when the delay time expires, the relay is disconnected; Feature 1. Using single chip control, stable performance; 2. It has an anti-reverse power protection diode to effectively protect the product; 3. It has a high current voltage regulator to provide sufficient power supply; 4. Adopt high-performance timing CPU design, double-layer PCB board; 5. There are power indication (red LED) and switch trigger timing indication (green LED); 6. The output can be connected to AC 250V 10A/(30A) or DC 30V 10A/(30A) load; 7. This module is triggered by an audio signal. When the audio signal reaches a certain value, it will be closed instantly, the module will start timing, the green LED will be lit, the relay will be pulled in, the timing will end, the green LED will be off, the relay will be released, and it will return to the normally closed end; 8. The module detects that there is an audio signal and the relay is turned on. If there is no audio signal, it will be delayed and disconnected. During the delay time, it will continue to receive an audio signal. The relay will always be connected. After stopping, the timing starts from a new one, and the relay is disconnected when the delay time expires; 9. There is a timing potentiometer to adjust the time, the product is designed to be adjustable from 1-180 seconds, and the time range can also be customized; 10. Timing time error is 5% Application 1. With other various sensors and relay modules, it can be used for various delay switches, directly with AC 220V products; 2. Corridor delay switch, delay energy-saving products; Electrical parameters: Voltage: 8-24V wide voltage power supply Current: greater than or equal to 100mA Load: 250V 10A/(30A) AC or 30V 10A/(30A) DC Timing time: adjustable from 1-180 seconds, and the time range can also be customized. Shipping list 1*24V audio signal trigger relay module, 1* with audio detection sensor module, 1* with 50CM cable length 3.5 audio plug.
|
|
|
|
|