|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ¼ö·®: 1
- ¸ðµ¨ ¹øÈ£: AVATAR
- Â÷·® À¯Çü: ºñÇà±â
- ¿ø°Ý Á¦¾î ÁÖº¯±â±â/ÀåÄ¡: ¼ö½Å±â
- ¿ø°Ý Á¦¾î Àå³²°¨ ºÎÇ° ¹× ¾Ç¼¼»ç¸®: ¶óµð¿À ½Ã½ºÅÛ
- Àç·á: º¹ÇÕ Àç·á
- ºê·£µå À̸§: Foxeer
- ±Ù¿ø: CN (Á¤Ç°)
- Ãßõ ³ªÀÌ: 14 + y
- »ç¿ë: Â÷·® & ¿ø°Ý Á¦¾î Àå³°¨
¿É¼ÇÁ¤º¸[(10)HD KIT V2 32G]
Specification |
|
Camera |
|
Model |
Avatar V2 camera |
Image Sensor |
1/3.2-Inch 4Mp 4:3sensor |
Resolution |
1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility; |
Ratio |
4:3 native /16:9 |
Lens |
2.1mm |
FOV |
160° |
Aperture |
F2.0 |
Shutter |
Rolling shutter |
Min.Illumination |
0.001Lux |
Weight |
7.2g |
Dimensions |
19*19*22mm |
Coaxial Cable |
140mm |
Gyroflow |
supported/ non-supported, two version |
VTX |
|
Model |
Avatar V2 module |
Communication Frequency |
5.725-5.850GHz |
Transmitter Power (EIRP) |
FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm |
1/O Interface |
JST1.0*4(Power in)JST0.8*6(USB) |
Mounting Holes |
25.5*25.5mm; 20*20mm |
Dimensions |
33.5*33.5*10.5mm |
Storage |
8G/32G |
Recording |
1080p/720p |
Weight |
17.6g |
Operating Temperature |
-20-40¡É |
Channels |
8 |
Wide Power Input |
6V-25.2V |
Supported FC System |
Betaflight; Inav; Fettec; ArduPilot; Kiss |
OSD |
Canvas mode |
Latency |
Average delay 22ms |
Antenna |
1(IPEX) |
Avatar V2 antenna |
|
Polarization |
LHCP |
Bandwidth |
5600MHz-6000MHz |
Gain |
1.9dBi |
VSWR |
¡Â1.5 |
Input Impedance |
50¥Ø |
Interface |
IPEX-1 |
Size |
R15 X 45mm (without cable) |
Weight |
2g |
Packing List |
|
USB transfer extension cable |
X1 |
4 Pin silicone cable |
X1 |
M2*4mm screws |
X8 |
M2*5mm screws |
X4 |
M2*6mm screws |
X4 |
M2*14mm screws |
X4 |
M2*5*0.5mm gasket |
X4 |
Bullet Point for Camera
Bullet Point for VTX
Add another 20*20mm mounting holes
Add 8/32g built-in storage option
Updated the design of PCB board and outer shell
A spare pad is added to provide two power connection modes
Optimized antenna base design and frequency button position for greater convenience
Avatar HD kit V2
Features
Bullet Point for Avatar HD kit V2
The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with ultra-low latency.
Camera V2 with 2K pixels, 4:3 native sensor for better image quality and native 4:3 mode image ratio allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images.Meanwhile, it`s better fit for regular FPV race as well.
The camera ( 32G VTX KIT) supports Gyroflow, take you a smooth and stable video quality.
In addition to the original 25mm x 25mm mounting holes, the kit now added 20mm x 20mm holes for greater compatibility with a wider range of FPV drone models.
Updated the design of PCB board and shell, improved the quality of VTX, more durable.
Optimized the installation place of the antenna, so as to better protect the VTX.
The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
A spare pad is added to provide two power connection modes.
The Avatar goggles are designed to be lightweight, mini, small and have a 46° field of view, making them more comfortable for pilots while giving them a more immersive FPV experience.
|
|
|
|
|