It is Chinese Firmware. Its setup language is Chinese. Even though it is Chinese Firmware, but by the help of google, it is not too hard to use.
Key Features:
??New generation Wi Fi 6 (802.11ax) technology.
??11ax 2.4g/5g dual band concurrent, wireless rate up to 2976mbps.
??GB 86 shell, elegant appearance. Overall dimension (mm): 88 * 86 *45.4, wall thickness 9.4mm.
??802.3af/at standard Poe network cable for power supply without external power supply.
??Spectrum navigation guides dual band users to preferentially connect to 5GHz frequency band, so as to balance the load of 2.4GHz and 5GHz frequency bands and ensure network performance.
??Fit mode supports automatic RF tuning.
??Fit mode supports intelligent roaming.
??Support the function of eliminating weak signal equipment and prohibiting the access of weak signal equipment.
??Fat and thin integration, different modes can be selected according to different application environments.
What it does?
2.5G network port, ultra Gigabit networking in the whole house. The back adopts 2.5G network port, which breaks through the Gigabit limit, easily drives 1000M to enter the house, and 2500M is not a problem, so as to easily realize the ultra Gigabit networking of the whole house.
(1)The new generation of Wi Fi 6 technology provides high-speed and stable wireless network:
2.4g/5g dual band concurrency, with a maximum wireless rate of 2976mbps, which meets the needs of Internet access in multi-user and high bandwidth scenarios. The 2.4GHz band has strong compatibility, long transmission distance, pure 5GHz band, less interference and dual band concurrency. It can be widely used in hotels, apartments, dormitories, villas and other dense environment scenes.
(2)Independent power amplifier circuit to improve wireless coverage:
2.4g/5g independent power amplifier circuit design reduces the noise interference of wireless signal reception, improves the wireless coverage effect, and the wireless coverage performance is stronger.
(3)It supports wireless easy to develop mesh networking, and the coverage and expansion of blind spot signal is more convenient:
Through TP-LINK easy show mesh technology, it forms a network with easy show equipment mesh, and tl-xap3002gi-poe thin section (party) adds easy show equipment through the software interface to realize wireless signal coverage in the signal blind spot area
(4)National standard 86 panel design, Poe power supply, easy installation and use:
The national standard 86 panel design can directly replace the original network panel. The wall thickness is only 9.4mm. There is no need to rewire and do not damage the original decoration. It supports 802.3af/at standard Poe network cable power supply. Each AP only needs one network cable, which is not constrained by power supply conditions. AP deployment is simple and construction is convenient.
(5)Automatically select the appropriate channel, and the network is smooth and stable:
According to the wireless channel usage of the AP environment, automatically select the appropriate channel to avoid co frequency interference and ensure wireless stability.
(6)Fat and thin, wireless networks of different sizes can be managed efficiently:
Fat AP mode (suitable for small area wireless coverage): it does not need to be used with TP-LINK wireless controller (AC). The AP can work independently and the wireless network cost is low; Fit AP mode (suitable for large-area wireless coverage): it needs to be used with TP-LINK wireless controller (AC). All APS can be managed uniformly through AC to reduce the difficulty of wireless management.
(7)Automatic RF tuning to optimize the overall performance of wireless network:
Support automatic RF tuning, automatically calculate the neighbor relationship between APs in the network, and automatically adjust the wireless transmission power and channel according to the real-time interference and load of nearby equipment, so as to ensure that the overall wireless network is always in the operation state of high speed and high performance.
(8)Intelligent roaming technology to improve the wireless experience of each user:
The intelligent roaming technology based on 802.11kvr protocol is adopted to help mobile phones, pads, computers and other terminal equipment automatically access to the AP with the best signal quality in multi AP scenarios such as hotels, apartments, dormitories and villas, so as to effectively improve the use experience of each user and the overall performance of wireless network.
?
Dual frequency in one Wi-Fi SSID
There is no need to reconnect Wi-Fi when walking, and the mobile process is no longer dropped.
This route has a dual-band function, which combines the 2.4GHz and 5GHz bands into one SSID, and realizes seamless roaming of Wi-Fi signals through the 802.11k/v protocol.
Smart selects the better and faster frequency band for mobile phones and other terminals. When the terminal moves, it automatically switches the frequency band, so that you can always maintain a high speed experience.
¡Ø The dual-frequency function is turned on by default, and can be turned on or off in the software settings according to individual needs.
This product is with Chinese Firmware. It is Chinese Firmware,and we have english translate instruction to help you setup.
Chinese-English?contrast Setup Guide helps you to setup very easily.
Moreover, by a smartphone, we strongly advise that you go to scan the QR code to download the APP at the following picture, then you can use the camera and translate any language, and the Chinese charactor can be transalted into any language, like English, French, Russian, Saudi Arabian, etc.