95pcs 5050 4-Pin RGB LED Strip Light Connector Kit with T/L-Shaped Strip Jumpers Strip Clips Wire Connection Terminal Splice LED Strip
Product Features:
¢º?Easiest Connect Way - Say goodbye to s0ldering and other operations, just feed the light strip to the connector to complete the connection. Lisxchda connector kit will help you DIY a colorful light world easily.
¢º?Upgraded Technology - Premium thickened wire and the flame retardant material, made for the jumper and led strip connectors, increased the operating temperature to -40 ¢µ ~ 221 ¢µ. Which ensures the current more stable and extends the life of the light strips.
¢º?PROFESSIONAL WIRE - Lisxchda light strip connector kit adopts professional "+, G, R, B" wire distribution, fits all 10mm(0.39``) wide 5050 RGB LED strips on the market. Make sure the color of your light strips displays perfectly.
¢º?APPLICATION - Applied to the connection between the light strip and strip, the strip and the controller, the strip and the splitter. Easily extend the light strips, fit various corners, cross obstacles, and diverge the light strips.
¢º?WHAT YOU GET - 100% satisfaction with12-months warranty and lifetime support. 1x 2 way RGB splitter cable, 8x LED Strip Jumper, 10x Gapless Connectors,10x L Shape Connectors, 2x T Shape Connectors, 2X 4 Pin female connector with bare wire terminal, 20x 4 Pin Male to Male Connector, 20x LED Strip Clips, 2 x Lever
The connectors apply to 4-Pin 5050 RGB LED SMD Light Strip.
Applicable light strip width:
10mm(0.39inch)
Applicable light strip thickness:
0.3mm-0.4mm
Applicable lines range:
AWG22#/20#
Current:
5A, AC, DC
Voltage:
DC 0-24V
Working temperature:
-40¡É +105¡É
Breakdown voltage:
1500V, AC/min
Contact resistance:
30m¥ØMAX
Insulation resistance:
1000m¥ØMIN
Product bite traction:
>12N
Product Material
Housing:
Nylon 66UL94V-0
Contact:
Over brass tin
¡¼CONNECTOR INSTRUCTIONS¡½
Ensure your light strips work well.
Cut along the suggested line of the LED strip evenly.
when used for waterproof LED strips, please strip the silicone on the contact area (about 0.25inch).
Align the "+" on the light strip with the side with the cover on the connector. Ignore the RGB/BGR labels, which are irrelevant.
Slide the LED strips to the connector from the slots on the connector sides.
Make sure that each metal pin on the connector is pressed above the brass contact point of the light strip.
Turn on the power to make sure that each LED is working. Then close the lids of connectors.
The Easiest Way to Connect 5050 4Pin 10mm (0.39inch wide) RGB LED Strips
Where there are strip lights, there are Lisxchda LED Connector Kit.
Easy to Use Different Connectors without Soldering