10S 36V 30A Li-ion Protection Board Li-ion Cell 18650 Battery Protection BMS PCB Board With Balance for Electric Car Inverter
10S 36V 30A split port balanced lithium battery protection board
Product parameters:
Model: 10 strings of 36V/30A split
Applicable voltage power: 36V; <1000W
Applicable battery type: 3.7V ternary battery, lithium cobalt oxide, lithium manganate battery
Function description: lithium battery - overcharge protection; overdischarge protection; overcurrent protection; output short circuit protection.
Maximum operating current: 40AMAX
Continuous working maximum current: 25A MAX
Over discharge protection voltage: 2.6V
Overcharge protection voltage: 4.25V
Charging current: 10A MAX
Balance charging function: with this function, the balance voltage is 4.2V
Temperature protection: with this function, the discharge high temperature is 75¡É; the charging low temperature is -7¡É;
Application areas: electric vehicles; twisting vehicles; electric power bicycles; scooters; inverters, etc.
Dimensions: length 64mm*width 35mm*thickness 9mm
Unit weight: 60g
Wiring steps:
(1) Connect the acquisition cable to each section of the battery to ensure the effective connection of the cable. Make sure that the single potential sequence increases or decreases sequentially at the plug end of the cable. The potential sequence is consistent with the potential sequence of the socket at the end of the protection board and the potential is - corresponding. (2) Solder the B- lead of the protection board to the total negative B- of the battery pack. Make sure that the solder joints are firm and reliable and have good electrical conductivity, that there are no possible hidden dangers such as extrusion and friction at the wiring position, and that the wiring is smooth and short. Avoid dropping, sticking, or touching solder, conductive objects, or leads into the protective plate. (3) Connect the plug of the cable with the socket of the protection board. First complete the welding of the B- lead of the protection board to the total negative B- of the battery pack, and then connect the plug of the cable to the socket of the protection board to ensure that the connection between the plug of the cable and the socket of the protection board is in place, and there are no charged objects. Or the lead contacts the protective plate, and take fixing measures. (4) B+ and c- are connected to the positive and negative poles of the charging interface, respectively. Make sure to isolate other leads during the soldering process to avoid short circuits. The voltage of the battery pack tested by the discharge interface and the charging interface is consistent with the battery pack voltage, the correctness of the polarity and the correctness of the wiring position.
Package Included:
Port balanced lithium battery protection board x1
Cable x1