ESP-WROOM-32 ESP8266 Burning Fixture Development Board ESP-01/01S/07/07S/12E/12F/12S/18T Easy Programer for Arduino
[ESP8266 Test Buring Development Board]
Description:
It is a Downloader for ESP-12S/12F/12E/07S/07S/01S/01 WIFI Wireless Module. It has output all GPIO ports for user debugging.
Install CH340 UART Driver Software on PC. Download FLASH tool `ESP FLASH DOWN LOAD TOOL`. Insert ESP8266 module on Shiled.
Connect module to PC by USB cable.
Chip clip fixing, Super simple operation, Repeatedly used.
Feature:
Super simple operation
Repeatedly used
Chip clip fixing
Parameter:
Work Voltage: DC 5V
Receiver Indicator: Yes
Transmitter Indicator: Yes
Power Indicator: Yes
Downloading Indicator: Yes
Suitable model: ESP-12S/ESP-12F/ESP-12E/ESP-07S/ESP-07S/ESP-01S/ESP-01
Work Temperature: -25 -85¡É
Download automatically:
Open FLASH download tool.
Set software parameters as shown.
Click START button on software to download firmware.
Manual download:
Open FLASH download tool.
Set software parameters as shown.
Keep press PROG button about 5second.
Then short press Reset button.
Click START button on software to download firmware.
Package Included:
1 * Downloader Tester Shield for ESP8266 ESP-12S/ESP-12F/ESP-12E/ESP-07S/ESP-07S/ESP-01S/ESP-01
[ESP-WROOM-32 Test Burning Development Board]
Description:
It is a Downloader for ESP-WROOM-32 ESP-32 WIFI Wireless Module.It has output all GPIO ports for user debugging.
Feature:
Super simple operation
Repeatedly used
Chip clip fixing
Parameter:
Work Voltage: DC 5V
Receiver Indicator: Yes
Transmitter Indicator: Yes
Power Indicator: Yes
Downloading Indicator: Yes
Suitable model: ESP-WROOM-32, ESP-WROOM-32D, ESP-WROOM-32U, ESP32-SOLO-1
Work Temperature: -25 -85¡É
Work Humidity: 5% -95%RH
Size: 51*50*15mm
Use Step:
Install CP2102 UART Driver Software on PC.
Download FLASH tool `ESP FLASH DOWN LOAD TOOL`.
Insert ESP-WROOM-32 or ESP-WROOM-32D or ESP-WROOM-32U orESP32-SOLO-1 on Module.
Connect module to PC by USB cable.
Download automatically:
Open FLASH download tool.
Set software parameters.
Click START button on software to download firmware.
Manual download:
Open FLASH download tool.
Set software parameters.
Keep press PROG button about 5second.
Package Included:
1 * Downloader Tester Shield for ESP-WROOM-32