Bluetooth Adapter 2 in 1 Low Latency Bluetooth 5.0 Transmitter Receiver 15m / 49ft Transmission ABS BT-21 for TV for Soundbar
Feature:
1. [2 in 1 Bluetooth Adapter] In TX mode, the Bluetooth transmitter is plugged into non Bluetooth devices such as TV, PC and MP3 player via AUX RCA and transmits to Bluetooth headphones, speaker, soundbar; In RX mode, the Bluetooth receiver can be connected to wired speaker, earphones and to receive from smartphones via Bluetooth.
2. [Stable Connection and Stereo Sound] With latest Bluetooth chip and software, the Bluetooth adapter not only helps to upgrade your old devices to Bluetooth capable without replacing them but also a CD like auditory feast. Tap to pair with for NFC equipped phones to connect.
3. [Widely Compatible] Rich Interfaces: RCA, AUX. This Bluetooth 5.0 receiver transmitter can connect to any active speaker with a standard 3.5mm port or 2RCA port, which is very suitable for home theater, stereo and car speakers, as well as smart phones, and for Android devices.
4. [Work While Charging] Built in battery can support a full charge of the Bluetooth adapter at one time. Support 8h for receiving and 5h for transmitting. When in a low battery state, the adapter can be plugged into the power supply for charging while working.
5. [Support Auto Startup Shutdown] Use the charging cable to connect your car or other power sources. When the car starts or has electricity, it will auto turn on and auto connect to the device you connected last time. When the car is turned off, it will auto shut down.
Specification:
Item Type: Bluetooth 5.0 Transmitter Receiver
Material: ABS
Model: BT-21
Frequency Response Range: 10Hz-20kHz
Signal To Noise Ratio: >90dB
Bluetooth Version: V5.0
Interface: RCA, AUX
Output Impedance: 75 ohms
Decoding IC: For Jerry IC
Effective Open Distance: Approx.15m / 49ft
Performance: Stereo HiFi Level
Battery Capacity: 200mAh Li-ion Battery (included)
Working Hours: RX 8h, TX 5h
Package List:
1 x Bluetooth 5.0 Transmitter Receiver
1 x 3.5mm Cable
1 x Type C Charging Cable
1 x RCA Cable
1 x Manual
How to use:You can use it after connecting the device. Bluetooth transmit mode (TX), convert wired devices into Bluetooth signals, and wirelessly transmit to the Bluetooth device for output; Bluetooth receive mode (RX), convert wired devices into Bluetooth signals, and wirelessly transmit to the Bluetooth device for output. Support NFC.