240-930MHZ Compatible With Multi-Frequency Automatic 433.92mhz Remote Control Smart Home Copy For Retractable Door Garage Door
Specification:
Working voltage: 12V
Working current: ¡Â12mA
Transmit power: 10-15mW
Launching distance: 100 meters (open)
Frequency deviation: ±0.2MHz
Transmission rate: 50-60KHZ
Frequency: 240-930MHZ
Support FSK, GFSK, OOK mod
Scope of application: widely used in various door and window controllers and other industrial control, anti-theft alarm, smart home and other fields
Note:
Buyers please note before placing an order:
This remote control is a learning remote control, not a copy remote control, and only supports the brands mentioned in the learning manual !!!
Features:
1. Multi-compatible, through key operation, it can be set as a remote control of any frequency or frequency in the list;
2. Back-check function, you can check what the current remote control is by pressing the key operation;
3. Compatible with multiple frequency bands, the frequency range is 240-930MHz;
4. Support: FSK, GFSK, OOK mode.
1. Setting mode:
Press ¨ç and ¨è at the same time, then keep pressing ¨ç and press ¨è four times in succession, (or keep pressing ¨è and press ¨ç four times in succession), then enter the setting mode (instructions) The light turns green and always on): Then press the keys representing the numbers in order to set them as the remote control of the desired frequency and frequency. For example: Press the 1-4-1-2 keys in sequence, and the indicator will flash 3 times slowly after the operation is completed, indicating that it has been successfully set to the remote control of HS1527, 433.92MHZ frequency.
Notice:
a. After the remote control is successfully set up, it needs to be paired with the original controller for learning once before it can be used.
b. If you have set it and used it once, if you want to go back and use it for the second time, it can be used directly without re-matching with the original controller under normal circumstances. If it cannot be used in some cases, please reconnect with the original controller. Match once.
2. View mode:
Press ¨ç and ¨è at the same time, then keep pressing ¨ç, press ¨è three times in succession (or keep pressing ¨è and press ¨ç three times in succession), then release the keys, and enter the viewing mode at this time : The remote control will flash red light four times, and the current remote control number is represented by the number of flashes each time. For example, if the remote control number is 1412, after entering the view mode, the light will flash 1 for the first time, and the second 4 flashes for the second time, 1 flash for the third time, and 2 flashes for the fourth time.
3. Note:
A. After entering the viewing or setting state, if there is no operation within 10 seconds, the green light flashes five times and exits, and the indicator light goes out.
B. When setting the number, if the number exceeds the allowable range of the list, the green light flashes five times and exits, and the indicator light goes out. Indicates that the setting has failed, and the remote control retains the last setting value.
C. In the viewing mode, if a button is pressed during the display, the subsequent display will be ignored and the setting mode will be entered directly. In addition, it will automatically enter the setting mode after the display is completed.
Photo Show :