sE7
A COMPACT & CLASSY CONDENSER
The sE7 is a high-quality back-electret small-diaphragm condenser microphone intended for a wide range of studio and live sound applications, from acoustic guitars to pianos to drums and beyond.
RECOMMENDED USE
Acoustic guitar, choir, orchestral + strings, piano, woodwinds, drums, percussion, cymbals / OH
HIGHLIGHTS
Optimized acoustic design, discrete class-A circuitry and a transformerless output
Clear, natural sound quality at all frequencies
Switchable -20dB attenuation pad
High sound pressure level (SPL) handling capability
Switchable low-cut 80 Hz filter
Extremely low-noise components
sE7 Matched Pair
SE7 MATCHED PAIR
Convincing stereo recordings require microphones with high consistency and accurate localization from the pair of microphones. Therefore, at sE every pair is selected from hundreds of individual microphones to provide identical performance. The result is the highest possible correlation over the whole frequency range, and virtually identical sensitivity for stunning three-dimensional recordings.
Specs
Components
Capsule
1 / 2" Back-electret condenser capsule
Power
Electrical impedance
<200 Ohms
Recommended load impedance
>1k Ohms
Connectivity
3-pin male XLR connector
Powering
48V Phantom Power (P48 according to IEC 61938)
Sound
Polar patterns
Cardioid
Frequency range
20 Hz - 20 kHz
Sensitivity
19 mV / Pa (-35 dBV)
Max SPL
136 / 156 dB (0 / 20 dB attenuation pad)
Equivalent noise level
16 dB
Dynamic range
120 / 140 dB (0 / 20 dB attenuation pad)
Signal to noise ratio
78 dB
Low-cut filter
80 Hz, 6 dB / Oct, switchable
Attenuation pad
20 dB, switchable
Current consumption
3.0 mA
Dimensions
Mic Diameter
23 mm (0.91 in.)
Mic length
120 mm (4.72 in.)
Mic weight
128 g (4.52 oz.)
What`s in the box
sE7 microphone
mic clip (with thread adapter)
wind screen
Signal to noise ratio
78 dB
Low-cut filter
80 Hz, 6 dB / Oct, switchable
Attenuation pad
20 dB, switchable
Current consumption
3.0 mA