Product Name: standard DP extension adapter cable (large DP interface to large DP interface)
Wire Length: 3cm-3m (support line length customization)
Product Specification: supports DP1.4 and HDR/DSC signal transmission.
Refresh rate: 1080P-240Hz, 2K-144/165Hz, 4K-144Hz
Sound Transmission: 32-bit/1536kHz
Operating temperature:-20¡É ~ 80¡É
Wire length description:
The wire length of our shop is the part of a single finger wire, excluding PCB and connectors. If PCB and connector are included, add about 4cm. The total length is about 9cm. For more information, see the size mark with a line length of 5cm in the following figure.
Product list of big mouth DisplayPort to big mouth DisplayPort series:
Product Name
Product Model
Speed Bandwidth
DP line straight male connector to straight male connector
DP5A-DP5B
DP1.4
DP line straight male connectorTurn up and bend male connector
DP5A-DP6B
DP1.4
DP line straight male connector rpmDown bend male connector
DP5A-DP7B
DP1.4
DP line straight male connectorTurn straight USB
DP5A-DP8B
DP1.2
DP line straight male connector rpmStraight binaural USB with chip
DP5A-DP8Q
DP1.4
DP line straight male connector rpmStraight binaural USB
DP5A-DP8T
DP1.2
DP Online bend male connector rpmUpbend male connector
DP6A-DP6B
DP1.4
DP line bend male connector turn down bend male connector
DP6A-DP7B
DP1.4
DP Online bend male connector to flat USB
DP6A-DP8B
DP1.2
DP Online bend male connector to flat straight binaural USB with chip
DP6A-DP8Q
DP1.4
DP Online bend male connector to flat straight binaural USB
DP6A-DP8T
DP1.2
DP offline bend male connector turnsUpbend male connector
DP7A-DP7B
DP1.4
DP offline bend male connector to flat USB
DP7A-DP8B
DP1.2
DP offline bend male connector turnsStraight binaural USB with chip
DP7A-DP8Q
DP1.4
DP offline bend male connector turnsStraight binaural USB
DP7A-DP8T
DP1.2
DP line straight male connectorTurn straight binaural USB Blue
DP5A-DP8T-BU
DP1.2
DP Online bend male connector to flat straight binaural USBBlue Style
DP6A-DP8T-BU
DP1.2
DP offline bend male connector to straight binaural USBBlue Style
DP7A-DP8T-BU
DP1.2
DP line straight male connectorTurn straight binaural USB Silver
DP5A-DP8T-SI
DP1.2
DP Online bend male connector to flat straight binaural USBSilver style
DP6A-DP8T-SI
DP1.2
DP offline bend male connector to straight binaural USBSilver style
DP6A-DP8T-SI
DP1.2
Note:
DP8B, DP8T without chip, two DP lines connected in series with postamble attenuation cannot DP1.4 full speed
DP8Q with relay chip, active chip technology can enhance the signal and support DP1.4 full speed
Note: The extension cable does not support two transfers, that is, the signal will be attenuated if more than two DP lines are connected. The two models of DP8B and DP8T do not support the full speed of DP1.4 without relay chips, and they need to slow down the speed to reduce the frequency before they can be used normally.
Model DP8Q with relay chip supports DP1.4. The signal of this product is unidirectional. The USB terminal must be connected to the display screen, and the other terminal male connector must be connected to the motherboard or graphics card.
Product Image:
Product real shot:
Summary of technical issues
What is the quality of the wire? Is there a shield?
It has metal layer shielding and adopts advanced EMI shielding conductive polymer. New materials are used for EMI shielding and flat cable design. This technology allows each cable to be completely covered by the electromagnetic interference shielding of conductive polymer to prevent the incidence or emission of electromagnetic frequency, minimize interference and performance degradation, and reduce the weight of cable.
Is the wire soft? Can you bend?
Black Wire thickness is 1.3mm, silver wire thickness is 1.4mm, blue wire 0.94mm wire
Model P8T/P8Q, what is the hole spacing and screws?
As shown in the following figure, the fixed terminal is fixed by M4 screws by default. If you want to use a smaller M3 screw hole, please leave a message when you take the payment, M3 fixed seat or contact customer service. The hole spacing is 27mm, you can contact customer service to obtain 3D STEP image files.
What is the difference between model P8T/P8Q?
Model DP8T has no chip, and two DP lines connected in series with postamble attenuation may not meet the requirements of DP1.4 high-speed signal transmission.
Model DP8Q with chip, using Diodes/PericomRedriver signal Repeater (Repeater IC), this chipIt can generate signals again and enhance their signal quality. To reduce the error rate of signal transmission, refer to the following diagram:.