aHR0cDovL2ZyZWVzaGlwLmNvLmty
1. Three stage PWM regulation charging: This product adopts direct charging, lifting charging and floating charging three stage PWM regulation charging modes. Using the controller to achieve efficient and fast intelligent charging, and effectively extend the service life of the battery.
2. Automatically manage: Automatically manage the works of solar panel and battery in solar system.
3. Overload and short circuit protection: It has built-in short circuit protection, open circuit protection, reverse protection, overload protection.
4. Practical: This product can extend battery life and keep load working properly.
5. Good quality: This product is made of high-quality materials, exquisite workmanship, very good quality and long service life.
6.This is very popular solar charger controller, it can be used for 12V 24V Lead acid, gel, AGM, Flood, Sealed Batteries, and Optional 10A 20A 30A
Type: 10A, 20A, 30A (optional)
Color:black and blue
This controller is a intelligent, multi-purpose solar charge and discharge controller. Fixed LCD display with a very friendly interface is used in this product; various control parameters can be flexibly set, fully meet your various application requirements.
This is NEW Solar Controller ,It can fully meet your home Photovoltaic system(including home lighting system)requirements.It can recognize 12V and 24V
Lead acid ,Gel battery
automatically.
There are optional 10A 20A 30A 40A 50A 60A model
10A:
if your battery is 12V ,the max solar panel input is 25V 120W
if your battery is 24V ,the max solar panel input is 50V 240W
20A:
if your battery is 12V, the max solar panel input is 25V 240W
if your battery is 24V, the max solar panel input is 50V 480W
30A
if your battery is 12V ,the max solar panel input is 25V 360W
if your battery is 24V ,the max solar panel input is 50V 720W
40A:
if your battery is 12V ,the max solar panel input is 25V 480W
if your battery is 24V ,the max solar panel input is 50V 960W
50A:
if your battery is 12V, the max solar panel input is 25V 600W
if your battery is 24V, the max solar panel input is 50V 1200W
60A
if your battery is 12V ,the max solar panel input is 25V 720W
if your battery is 24V ,the max solar panel input is 50V 1440W
Note: 12V batteries can only connect 16V-23V solar panel charging. 24V battery can only connect 30V-40V solar panel charging.
Please pay attention to the series connection and parallel connection ways of multi-solar panels.
1.Build-in industrial micro controller.
2.Big LCD display,all adjustable parameter.
3.Fully 4-stage PWM charge management.
4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.
5.Dual mosfet Reverse current protection ,low heat production.
Parameter:
MODEL |
PWM 10A |
PWM 20A |
PWM 30A |
PWM 40A |
PWM 50A |
PWM 60A |
Battery Voltage |
12V 24V Auto |
Charging Current |
10A |
20A |
30A |
40A |
50A |
60A |
Discharging Current |
10A |
10A |
10A |
20A |
30A |
30A |
Max Solar input |
50V(for 24V battery) 25V(for 12V battery) |
Equalization |
14.4V(Sealed) 14.2V(Gel) 14.6V(Flood) |
Float charge |
13.7V(defaul,adjustable) |
Discharge stop |
10.7V(defaul,adjustable) |
Discharge reconnect |
12.6V(defaul,adjustable) |
Charge reconnect |
13V |
Voltage of open light |
Solar Panel 8V(Light lights delay) |
Voltage of close light |
Solar Panel 8V(Light off delay) |
USB output |
5V/3A |
Self-consume |
<10mA |
Operating temperature |
-35°C~+60°C |
Size |
133.5*70*35mm |
188*90*47mm |
*all red color voltage X2 ,while using 24V system.
|
Connection:
1.Connect the battery to the charge regulator - plus and minus.
2.Connect the photovoltaic module to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!
1 pcs* Solar Charger Controller
Notes:
1. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2. Please allow slight dimension difference due to different manual measurement.